Home > Windows files > UltraMonMirror.sys

What does the UltraMonMirror.sys file do?

The UltraMonMirror.sys process is also known as UltraMon or, as the case may be, is a part of as the case may be. This software is produced by Realtime Soft. An obsolete or defective version of UltraMonMirror.sys can cause problems for your computer that can range from slowness to error messages such as these:

Free PC Check

UltraMonMirror.sys  UltraMon fixDownload Now UltraMonMirror.sys Fix Tool

This tool helps repair Windows Error and helps it run faster.


What you should know about UltraMonMirror.sys UltraMon

UltraMon developed by Realtime Soft for the Windows Operating System. The latest known version of UltraMonMirror.sys is 2.7.0.0, which was produced for Windows. The file UltraMonMirror.sys is found in a subdirectory of "C:\Windows\system32\" or "C:\Program Files". Frequently occurring are file sizes such as 3584 Byte (3KB) bytes.

How to fix UltraMonMirror.sys?

Method 1: Solving the DLL Error by Copying the UltraMonMirror.sys File to the Windows System Folder

    Download the UltraMonMirror.sys error Repair Tool.
    Click "Save File" and follow the on-screen instructions to install the program.
    First, open DLLEscort, click on the "File Repair" to the right of the input "file name" and click "download"


    After the download is complete, find the corresponding version of the file, click on "Open"


    Step 2:Copy it to the corresponding directory Or Copying the UltraMonMirror.sys file into the Windows/System32 folder
  1. If you are using a 64 Bit operating system, copy the "UltraMonMirror.sys" file and paste it into the "C:\Windows\sysWOW64" as well.
    NOTE! On Windows operating systems with 64 Bit architecture, the dll file must be in both the "sysWOW64" folder as well as the "System32" folder. In other words, you must copy the "UltraMonMirror.sys" file into both folders.
    Pasting the UltraMonMirror.sys file into the Windows/sysWOW64 folder
    Step 3:Pasting the UltraMonMirror.sys file into the Windows/sysWOW64 folder
  2. Next, You need to do a full System Scan

  3. In order to complete this step, you must run the Command Prompt as administrator. In order to do this, all you have to do is follow the steps below.
    NOTE! We ran the Command Prompt using Windows 10. If you are using Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP, you can use the same method to run the Command Prompt as administrator.
    1. Open the Start Menu and before clicking anywhere, type "cmd" on your keyboard. This process will enable you to run a search through the Start Menu. We also typed in "cmd" to bring up the Command Prompt.
    2. Right-click the "Command Prompt" search result that comes up and click the Run as administrator" option.
    Running the Command Prompt as administrator
    Step 4:Running the Command Prompt as administrator
  4. Paste the command below into the Command Line that will open up and hit Enter. This command will delete the damaged registry of the UltraMonMirror.sys file (It will not delete the file we pasted into the System32 folder; it will delete the registry in Regedit. The file we pasted into the System32 folder will not be damaged).
    %windir%\System32\regsvr32.exe /u UltraMonMirror.sys
    Deleting the damaged registry of the UltraMonMirror.sys
    Step 5:Deleting the damaged registry of the UltraMonMirror.sys
  5. If you have a 64 Bit operating system, after running the command above, you must run the command below. This command will clean the UltraMonMirror.sys file's damaged registry in 64 Bit as well (The cleaning process will be in the registries in the Registry Editor< only. In other words, the dll file you paste into the SysWoW64 folder will stay as it).
    %windir%\SysWoW64\regsvr32.exe /u UltraMonMirror.sys
    Uninstalling the UltraMonMirror.sys file's broken registry from the Registry Editor <em>(for 64 Bit)</em>
    Step 6:Uninstalling the UltraMonMirror.sys file's broken registry from the Registry Editor (for 64 Bit)
  6. We need to make a new registry for the dll file in place of the one we deleted from the Windows Registry Editor. In order to do this process, copy the command below and after pasting it in the Command Line, press Enter.
    %windir%\System32\regsvr32.exe /i UltraMonMirror.sys
    Creating a new registry for the UltraMonMirror.sys file in the Windows Registry Editor
    Step 7:Creating a new registry for the UltraMonMirror.sys file in the Windows Registry Editor
  7. Windows 64 Bit users must run the command below after running the previous command. With this command, we will create a clean and good registry for the UltraMonMirror.sys file we deleted.
    %windir%\SysWoW64\regsvr32.exe /i UltraMonMirror.sys
    Creating a clean and good registry for the UltraMonMirror.sys file <em>(64 Bit için)</em>
    Step 8:Creating a clean and good registry for the UltraMonMirror.sys file (64 Bit için)
  8. You may see certain error messages when running the commands from the command line. These errors will not prevent the installation of the UltraMonMirror.sys file. In other words, the installation will finish, but it may give some errors because of certain incompatibilities. After restarting your computer, to see if the installation was successful or not, try running the software that was giving the dll error again. If you continue to get the errors when running the software after the installation, you can try the 2nd Method as an alternative.

Method 2: Copying the UltraMonMirror.sys File to the Software File Folder

  1. In order to install the dll file, you need to find the file folder for the software that was giving you errors such as "UltraMonMirror.sys is missing", "UltraMonMirror.sys not found" or similar error messages. In order to do that, Right-click the software's shortcut and click the Properties item in the right-click menu that appears.
    Opening the software shortcut properties window
    Step 1:Opening the software shortcut properties window
  2. Click on the Open File Location button that is found in the Properties window that opens up and choose the folder where the application is installed.
    Opening the file folder of the software
    Step 2:Opening the file folder of the software
  3. Copy the UltraMonMirror.sys file into this folder that opens.
    Copying the UltraMonMirror.sys file into the software's file folder
    Step 3:Copying the UltraMonMirror.sys file into the software's file folder
  4. This is all there is to the process. Now, try to run the software again. If the problem still is not solved, you can try the 3rd Method.

Method 4: Solving the UltraMonMirror.sys Error Using the Windows System File Checker

  1. In order to complete this step, you must run the Command Prompt as administrator. In order to do this, all you have to do is follow the steps below.
    NOTE! We ran the Command Prompt using Windows 10. If you are using Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP, you can use the same method to run the Command Prompt as administrator.
    1. Open the Start Menu and before clicking anywhere, type "cmd" on your keyboard. This process will enable you to run a search through the Start Menu. We also typed in "cmd" to bring up the Command Prompt.
    2. Right-click the "Command Prompt" search result that comes up and click the Run as administrator" option.
    Running the Command Prompt as administrator
    Step 1:Running the Command Prompt as administrator
  2. Type the command below into the Command Line page that comes up and run it by pressing Enter on your keyboard.
    sfc /scannow
    Getting rid of Windows Dll errors by running the sfc /scannow command
    Step 2:Getting rid of Windows Dll errors by running the sfc /scannow command
  3. The process can take some time depending on your computer and the condition of the errors in the system. Before the process is finished, don't close the command line! When the process is finished, try restarting the software that you are experiencing the errors in after closing the command line.

How to uninstall UltraMon SoftWare

UltraMonMirror.sys  UltraMon fix

To remove UltraMon from your computer, please follow the manual instructions below .

  1. Click the Windows Start Button. In Windows 8, look for Control Panel.
  2. Click Control Panel.
  3. Click Uninstall a program.
  4. Look for UltraMon or Realtime Soft in the list of available programs.
  5. Click Uninstall.

How to tell if UltraMonMirror.sys (UltraMon) was uninstalled cleanly

After uninstalling, restart your computer. Then start Windows Explorer and see if there is still a folder with the name of the software under C:\Program Files. Be sure to check the Registry as well for remnants of UltraMon. To do this, start "Regedit", then look under "HKEY_LOCAL_MACHINE" > "Software" for UltraMon or the name of the producer. Always keep in mind that only a computer professional should ever directly delete entries in the Windows Registry.

Last update

  • ulzwlib.dll how to fix?
  • ulzexe.dll how to fix?
  • ulyATtkx.dll how to fix?
  • ulxqgh8b.dll how to fix?
  • ulxmlrpcpp.dll how to fix?
  • ulxml9.dll how to fix?
  • ulxml.exe how to fix?
  • uLxbcsFR.dll how to fix?
  • ulWYfFYqf.dll how to fix?
  • uLWTool.dll how to fix?
  • ULWordHuntTool.dll how to fix?
  • ULvrb.dll how to fix?
  • ulvqdsn.dll how to fix?
  • ULViewer.exe how to fix?
  • ULViewActiveX.dll how to fix?
  • ulview.exe how to fix?
  • ulvideoeditrc.dll how to fix?
  • ulVideoEditBmpRC.dll how to fix?
  • ulvideoedit.dll how to fix?
  • ulvf2cg.dll how to fix?